General-purpose vibration meter Product List and Ranking from 4 Manufacturers, Suppliers and Companies

General-purpose Vibration Meter VM-83

Three mode support for acceleration, velocity, and displacement. Connection to servo acceleration LS-10C is possible.

● Measures and evaluates vibrations detected by a piezoelectric accelerometer or servo accelerometer. ● Equipped with four types of input terminals, allowing selection of acceleration, velocity, or displacement. ● By using a servo accelerometer, it is possible to measure in the ultra-low frequency range of 0.1Hz to 1Hz, which is difficult with a piezoelectric accelerometer. ● Equipped with a comparator function, enabling output for level determination. ● In addition to conventional indication characteristics, it features maximum value hold and peak hold functions. ● Can be used for approximately 20 hours (when using alkaline batteries) with four AA batteries. ● Data can be printed out via printer output (a separately sold printer is required). ● VM-83 management software VM-83PA1 (optional) is available.

Company：リオン
Price：Other

Vibration Inspection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

General-purpose vibration meter VM-82A

Corresponding to the modes of acceleration, velocity, and displacement. Up to 1000 data points can be stored.

This is a vibration meter used for maintenance management and inspection of industrial machinery, primarily focusing on rotating machinery. It measures acceleration, velocity, and displacement within appropriate frequency ranges to assess the vibration condition of the machinery.

Company：リオン
Price：Other

Vibration Inspection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

General-purpose vibration meter VM-82 rental

Easy evaluation of the vibration state of machinery.

Maintenance management and inspection of industrial machinery centered around rotating machines. A general-purpose vibration meter optimal for performance testing in various stages of machine development.

Company：レックス
Price：Other

Other measurement, recording and measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

General-purpose vibration meter VM-83 rental

Equipped with four types of input terminals, allowing for the selection of acceleration, velocity, and displacement.

By using a servo accelerometer, it is possible to measure ultra-low frequency vibrations above 0.1 Hz, which is difficult with piezoelectric accelerometer pickups, making it a versatile vibration meter.

Company：レックス
Price：Other

Other measurement, recording and measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

General-purpose vibration meter VM-80 rental

The measurement results are displayed simultaneously by the meter's indication and the digital display.

This is a vibration meter designed to use a piezoelectric accelerometer as a detector, capable of accommodating a wide range of vibration measurements.

Company：レックス
Price：Other

Other environmental analysis equipment
Vibration Testing
Vibration Inspection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

General-purpose vibration meter VM-80 rental

This is a vibration meter designed to accommodate extensive vibration measurements.

The general-purpose vibration meter VM-80 is designed to accommodate a wide range of vibration measurements using a piezoelectric accelerometer as its detector. It features three types of input terminals and a broad sensitivity calibration range, allowing for the use of all kinds of piezoelectric accelerometers. It can measure not only vibration acceleration but also vibration velocity and displacement in three different modes. Measurement results are displayed simultaneously through both a meter indication and a digital display. The digital display compensates for the difficulty in reading due to fluctuations in the pointer, showing the average value over a period of two seconds. 【Features】 ○ The indication characteristics include four types: effective value (true effective value), equivalent peak value, equivalent p-p value, and peak value, all of which can hold the maximum value. ○ It can easily be configured as a 2-channel or 3-channel type using connecting rods. ○ The input circuit uses a charge amplifier, ensuring that changes in the length of the pickup cable do not affect the measurement values. For more details, please contact us.

Company：レックス
Price：Other

Rental/lease
Other measurement, recording and measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

General-purpose vibration meter VM-82

Maintenance management, inspection, and performance testing of industrial machinery.

This is a vibration meter used primarily for the maintenance management and inspection of industrial machinery centered around rotating machines, as well as for performance testing during the development stages of various machines. It measures acceleration (ACC), velocity (VEL), and displacement (DISP) within an appropriate frequency range, allowing for easy evaluation of the machine's vibration condition. The setting keys that are not used regularly are concealed with a slide cover, and the operation of the main unit can be done with one hand (with the HOLD, STORE, and POWER switches located on the side). The backup function allows measurements to start with the previously set conditions upon power-on. By changing the pickup, it is possible to measure both minute levels and high accelerations. It features an energy-saving design that allows for continuous measurement for 30 hours when using alkaline batteries. The compact design weighs only 320g, including the batteries.

Company：姫島陽介株式会社アスコム
Price：Other

Other measurement, recording and measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Rental of the general-purpose vibration meter VM-82A/VM-82.

A highly versatile vibration meter for maintenance, inspection, and performance testing.

You can easily measure acceleration, velocity, and displacement (ACC, VEL, DISP) for vibration measurements of the target. If you are looking for a commonly used vibration meter, this model is recommended. ★ For more details, please check the product page from the link below. ★ You can also obtain the comprehensive catalog (electronic) from the "PDF Download" materials. ★ You can request a quote from the "Contact Us" section. Feel free to reach out.

Company：レックス
Price：Other

Vibration Inspection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

General-purpose vibration meter "VM-82A" [Rental]

A vibration meter used mainly for the maintenance management of industrial machinery, focusing on rotating machinery. It measures acceleration/velocity/displacement within an appropriate frequency range to assess the vibration condition of the machinery.

■ Rental item includes an accelerometer pickup PV-57I with a magnetic attachment. It allows for general vibration measurement using the PV-57I. Measurement can be conducted without holding the pickup thanks to the magnetic attachment at the tip. A coiled cable is included to prevent cable entanglement with machinery. ■ Evaluation and inspection are possible in three modes: acceleration, velocity, and displacement. You can select the range, allowing for appropriate values to be viewed in each mode. The range of measurement targets expands with the mode and range suited to the application. ■ Data memory function. Up to 1000 data points can be stored in the internal memory. Saved data can be displayed by specifying the address in recall mode. It features a USB interface for transferring saved data to a computer. (Transfer software must be downloaded from the manufacturer's website.) ■ Easy-to-read LCD screen. The LCD screen displays a bar graph and numerical values simultaneously, making it easy to grasp fluctuations. Information such as the set frequency range is also displayed. The backlight function allows for content verification in dark places. When in an overload state, "OVER" is displayed, and the entire LCD turns red.

Company：ソーキ
Price：Other

Vibration Inspection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

General-purpose vibration meter "VM-82" [Rental]

It corresponds to three modes: acceleration, velocity, and displacement. It is a compact, handheld general-purpose vibration meter that can store up to 1000 data points.

■ Rental items include an accelerometer pickup The PV-57I, equipped with a magnetic attachment, allows for versatile vibration measurement. Measurements can be taken without needing to hold the device, thanks to the magnetic attachment at the pickup tip. A coiled cable is included to prevent cable entanglement with machinery. ■ Evaluation and inspection possible in three modes: acceleration, velocity, and displacement You can select the range, allowing for appropriate values to be viewed in each mode. This expands the range of measurement targets with modes and ranges suited to your application. ■ Data memory function Up to 1000 data points can be stored in the internal memory. Saved data can be displayed by specifying the address in recall mode. It features a USB interface for transferring saved data to a computer (transfer software must be downloaded from the manufacturer's website). ■ Easy-to-read LCD screen The LCD screen displays both a bar graph and numerical values simultaneously, making it easy to grasp fluctuations. Information such as the set frequency range is also displayed. The backlight function allows for content verification in dark environments. When an overload condition occurs, "OVER" is displayed, and the entire LCD turns red.

Company：ソーキ
Price：Other

Vibration Inspection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

General-purpose vibration meter 'VM-83' [Rental]

Measurement and evaluation of vibrations detected by a piezoelectric accelerometer. It is a versatile vibration meter that can measure acceleration, velocity, and displacement.

■ Various pickups can be connected, allowing for a wide range of vibration measurements. *Rental item included is PV-85. ■ Equipped with a comparator function, enabling level judgment output. ■ Features such as effective value, equivalent peak value, equivalent P-P, maximum value hold, and peak hold are included as indication characteristics. ■ Equipped with AC output and DC output as output terminals. ■ Includes serial communication function as an interface. ■ Data can be printed out using the SERIAL terminal.

Company：ソーキ
Price：Other

Vibration Inspection

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration